2021-01-15T10:58:31+01:00October 29, 2020
Technology & Innovation
Eva Trenz
By

We shed light on the recycling jungle

Upcycling, downcycling, recycling and better use of raw materials are only a few terms for different sustainability efforts in the textile industry. The subject is complex and can have many different characteristics.

On the one hand there are disposable PET bottles, from which new raw materials and in the second life cycle nonwovens or carpets can be created. Yesterday’s fashion items, i.e. used textiles, can also become a sought-after raw material and play a role in yarn production. A further recycling option belongs to the area of optimised raw material utilisation: Thanks to advanced machine technologies, high-quality yarns are nowadays produced from production waste or even from noils.

Outdated trousers become a top fashion item?

Unfortunately, textile recycling is not that simple. In Germany alone, over one million tonnes of old clothes are collected every year. But this huge mountain of material has to be sorted, classified and processed before it can be used as raw material. Some of it is marketed as used clothing. Another part is used as raw material and further processed, for example to make cleaning cloth, insulation material in cars or even bank notes. And a very large proportion is destined to end up in the incinerator because of its poor initial quality.

The simplest recycling route: Water bottle with a future

A basic distinction is made between chemical and mechanical recycling processes. The recovery of polyester granulate from PET bottles is assigned to the chemical side. The bottles are shredded into flakes, whose polymers are then melted. These melted polymers represent the spinning mass from which new fibers or directly a new nonwoven is produced.

For this process, Truetzschler Man-Made Fibers offers a line for producing high-quality carpet yarns, the so-called BCF yarns (Bulky Continous Filaments), directly from PET flakes. The process has three stages and consists of melting R-PET (recycled polyethylene terephthalate from PET bottles), spinning of a multifilament yarn via the spinneret, and subsequent drawing and texturing. Texturing refers to the permanent crimping of the filament.

However, fibers for short staple fiber yarns (Truetzschler Spinning) or for nonwovens (Truetzschler Nonwovens) can also be the target. For the Truetzschler installation concepts, it makes no difference whether the polyester fiber comes from a secondary raw material or a virgin raw material.

Mechanical recycling

The degree of difficulty of recycling processes always depends on the initial quality of the (secondary) raw materials. Blended fabrics, for example, represent a basic problem in the recycling of used clothing fiber materials – because sorting accuracy is really scarce on the used textiles market: Cotton, viscose, polyester, silk, polyamide, polyacrylonitrile, wool, linen and other materials can be mixed together in one fabric. On the other hand, secondary raw materials can also be sorted by type: Waste or noils directly produced in the spinning mill are of excellent quality and can be perfectly recycled.

The path to a new beginning

The later the secondary raw material is obtained, the more complex the recycling process becomes. Waste from spinning preparation can be processed comparatively well. One example of this are the so-called noils, i.e. combed-out fibers and neps, which are undesirable especially where high-quality yarns are concerned. Since the material has already passed through the blow room and over the cards, it is high-quality “waste”. This is a recyclable raw material that is used, for instance, in banknotes or hygiene products or is spun into yarn itself.

Example for production waste: Blow room waste

It is also possible to reclaim the share of good fibers from production waste, such as blow room and carding waste, and reintroduce it into the spinning preparation process. A separate Truetzschler waste recycling line with particularly intensive cleaning by the Waste Cleaner CL-R increases the degree of opening and enables recycling down to the last good fibers.

Used textiles require many intermediate steps before the resulting raw material can be turned into yarn in a spinning mill. Prior to running on Truetzschler machines, the material must first be sorted and cut, before it becomes a single fiber again. The result are bales made of opened and separated secondary fibers, which can then be fed again to the spinning preparation.

Example for regenerates: Fibers from torn jeans

Bales made of 100% recycled fibers can be processed via a simplified Truetzschler spinning opening line. Additional intensive cleaning of the fibers is no longer necessary, as they have already been cleaned before being processed into textiles. When processing blends of recycled fibers and raw cotton or synthetic fibers, the use of a T-BLEND line is recommended. This can guarantee the accuracy of the desired blending ratio, even at the highest production levels. To avoid losing too many fibers in the preparation process, the recycled fibers are no longer exposed to a separate intensive pre-cleaning process, but are mixed with the raw material afterwards.

 

 

Trützschler Waste Recycling Line, for example for pre-cleaning of blow room or card waste.

 

These bales of secondary raw materials are not only used to produce yarns, but also carded nonwovens on Truetzschler Nonwovens lines. The classic method applied here is hydroentanglement. Thermobonding, after the addition of bicomponent fibers, and chemical bonding are also possible.

Sustainability and recycling: More than just a trend

The textile industry has put sustainability on the agenda. Efforts focus on environmental and resource protection, the substitution of chemicals, the promotion of sustainable fibers and humane working conditions. From cultivation to recycling or disposal, however, there are a variety of approaches to achieve these goals.

As one of the leading textile machinery manufacturers, Truetzschler faces up to this responsibility. When designing our machines, we have been paying attention to shortened processes, optimised raw material utilisation, durable machine components and machines that significantly improve the recycling process, and not just since yesterday. Together with our customers we can thus make a contribution to a sustainable textile production chain.

Latest stories

September 15, 2023
Corporate Citizenship | HR | The Company | Trützschler Foundation|

Apprentices’ special commitment honored by the Trützschler Foundation, ROCKID.one and Mayor of Mönchengladbach Felix Heinrichs

Several apprentices in Mönchengladbach were recently honored for their outstanding commitment during the “Azubis zu Schulen” project – with special recognition from the Trützschler Foundation, its partner ROCKID.one and Mayor [...]

Go to Top